***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu May 29, 2025 5:17 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 3 of 3
  [ 69 posts ]  Go to page Previous  1, 2, 3
  Print view Previous topic | Next topic 
Author Message
Michaeldc
PostPosted: Tue Jan 10, 2023 3:54 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1537
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
meddlingfool wrote:
Ever heard the trick where instead of flush cutting the excess, you route a channel lesser in all dimensions than your bindings? That way you don’t have to deal with sanding the endgrain which makes life just a touch more bearable. Fairing the sides is almost my least enjoyed task…


Yes, I learned it from you [:Y:]

Thanks!


These users thanked the author Michaeldc for the post: bcombs510 (Tue Jan 10, 2023 4:22 pm)
Top
 Profile  
 
bcombs510
PostPosted: Tue Jan 10, 2023 4:25 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3709
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
meddlingfool wrote:
Ever heard the trick where instead of flush cutting the excess, you route a channel lesser in all dimensions than your bindings? That way you don’t have to deal with sanding the endgrain which makes life just a touch more bearable. Fairing the sides is almost my least enjoyed task…

I learned this tip from you as well. The first time I used it I was sanding with Elevate’s rolling pin and was amazed at how fast and easy it went compared to earlier instruments. That telltale sign of the two lines on the sanding drum where it’s wearing itself out against the plates was gone!


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


These users thanked the author bcombs510 for the post: Michaeldc (Tue Jan 10, 2023 4:57 pm)
Top
 Profile  
 
meddlingfool
PostPosted: Tue Jan 10, 2023 5:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7500
First name: Ed
Last Name: Bond
City: Nanaimo
Country: Canada
Focus: Build
Status: Professional
I learned it from someone here who learned it from Mario P, lol…


These users thanked the author meddlingfool for the post (total 2): Robbie_McD (Sun Jan 15, 2023 7:54 am) • Michaeldc (Tue Jan 10, 2023 7:16 pm)
Top
 Profile  
 
Michaeldc
PostPosted: Fri Jan 13, 2023 1:52 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1537
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Well….I chickened out on using my new Elevate binding jig and instead used my SM binding setup. As I was practicing with the Elevate jig, I kept lifting the guitar body off of the back guide. You only have to lift it one time to mess up. Hmmm…

M


You do not have the required permissions to view the files attached to this post.

Last edited by Michaeldc on Fri Jan 13, 2023 5:52 pm, edited 1 time in total.

These users thanked the author Michaeldc for the post (total 4): Pmaj7 (Fri Jan 13, 2023 5:43 pm) • Durero (Fri Jan 13, 2023 5:09 pm) • J De Rocher (Fri Jan 13, 2023 3:04 pm) • bcombs510 (Fri Jan 13, 2023 2:45 pm)
Top
 Profile  
 
Pmaj7
PostPosted: Fri Jan 13, 2023 5:47 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2260
Location: Seattle WA
Focus: Build
Status: Semi-pro
Yeah, it seems like a precarious way to do it, but people who use that style jig love them!

The only professionals that I know who make a lot of guitars use something of a similar design. They don't even use the side register. They just register the top and back on the flat plate next to the bit and do it very carefully and quickly. Not sure if they do a climb cut first or not.

Pat

_________________
Pat


These users thanked the author Pmaj7 for the post: Michaeldc (Fri Jan 13, 2023 5:51 pm)
Top
 Profile  
 
Michaeldc
PostPosted: Mon Jan 16, 2023 3:01 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1537
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Figured I’d rough-in the neck this morning. Next up, the heel cap and headstock back veneer.

Getting close, M


You do not have the required permissions to view the files attached to this post.

These users thanked the author Michaeldc for the post (total 2): Durero (Sat Jan 21, 2023 1:01 pm) • Pmaj7 (Mon Jan 16, 2023 3:25 pm)
Top
 Profile  
 
Pmaj7
PostPosted: Mon Jan 16, 2023 3:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2260
Location: Seattle WA
Focus: Build
Status: Semi-pro
Why the extra little caul at the top of the fretboard?

Pat

_________________
Pat
Top
 Profile  
 
Michaeldc
PostPosted: Mon Jan 16, 2023 3:43 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1537
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Pmaj7 wrote:
Why the extra little caul at the top of the fretboard?

Pat


Second try: In that it’s a fan-fret and the FB is angled, I held the aluminum caul back a bit so I could clear squeeze out from the nut slot and applied the little cork caul to the end of the FB to make sure it was down all the way.

M


Last edited by Michaeldc on Mon Jan 16, 2023 8:06 pm, edited 1 time in total.

These users thanked the author Michaeldc for the post: Pmaj7 (Wed Jan 18, 2023 2:02 am)
Top
 Profile  
 
Terence Kennedy
PostPosted: Mon Jan 16, 2023 6:52 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3426
Location: Alexandria MN
Michaeldc wrote:
Well….I chickened out on using my new Elevate binding jig and instead used my SM binding setup. As I was practicing with the Elevate jig, I kept lifting the guitar body off of the back guide. You only have to lift it one time to mess up. Hmmm…

M


I had similar concerns about the Elevate but had a kid spend some time in my shop and he worked two years in the Santa Cruz binding department. He said they used a jig similar to the Elevate to rout the binding accepting the fact that there could be some minor scalloping. Then they routed the purfling channel with a tower type jig which was totally dependable for accuracy.

Made sense but I have not tried that approach yet.

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.


These users thanked the author Terence Kennedy for the post (total 2): Pmaj7 (Wed Jan 18, 2023 2:05 am) • Michaeldc (Mon Jan 16, 2023 7:04 pm)
Top
 Profile  
 
Michaeldc
PostPosted: Mon Jan 16, 2023 7:08 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1537
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Terence Kennedy wrote:
Michaeldc wrote:
Well….I chickened out on using my new Elevate binding jig and instead used my SM binding setup. As I was practicing with the Elevate jig, I kept lifting the guitar body off of the back guide. You only have to lift it one time to mess up. Hmmm…

M


I had similar concerns about the Elevate but had a kid spend some time in my shop and he worked two years in the Santa Cruz binding department. He said they used a jig similar to the Elevate to rout the binding accepting the fact that there could be some minor scalloping. Then they routed the purfling channel with a tower type jig which was totally dependable for accuracy.

Made sense but I have not tried that approach yet.


Now that does make sense!

Maybe after practicing only cutting the binding ledge you would gain confidence with the Elevate unit and be able to cut both -

Thanks!
Top
 Profile  
 
SteveSmith
PostPosted: Mon Jan 16, 2023 7:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7461
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I had the same concerns but I just went for it. So far I've used my Elevate binding jig on three guitars. I'm pretty steady but not perfect and have had slight lifting as I went around; it doesn't seem to have mattered much and I didn't notice any fit issues when I installed the binding and purfling. I have previously used a tower and cradle jig with bearing bits.

_________________
Steve Smith
"Music is what feelings sound like"


Last edited by SteveSmith on Mon Jan 16, 2023 7:37 pm, edited 1 time in total.

These users thanked the author SteveSmith for the post (total 2): Pmaj7 (Wed Jan 18, 2023 2:06 am) • Michaeldc (Mon Jan 16, 2023 7:46 pm)
Top
 Profile  
 
Barry Daniels
PostPosted: Mon Jan 16, 2023 7:26 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3269
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Pmaj7 wrote:
Why the extra little caul at the top of the fretboard?

Pat


I use similar separate cauls when I want to ensure that a critical joint needs to be really tight, like the end of the fretboard.


These users thanked the author Barry Daniels for the post (total 2): Pmaj7 (Wed Jan 18, 2023 2:07 am) • Michaeldc (Mon Jan 16, 2023 7:46 pm)
Top
 Profile  
 
Michaeldc
PostPosted: Fri Jan 20, 2023 8:11 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1537
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Well that’s pretty much that about that - I need to install some frets and then spend several hours sanding and refining before sending it off to finish. The client was down for a shop-visit yesterday and is pretty excited!

M


You do not have the required permissions to view the files attached to this post.

These users thanked the author Michaeldc for the post (total 4): Hesh (Sat Feb 11, 2023 3:29 am) • Durero (Sat Jan 21, 2023 1:04 pm) • Robbie_McD (Sat Jan 21, 2023 9:12 am) • bcombs510 (Sat Jan 21, 2023 5:48 am)
Top
 Profile  
 
Darrel Friesen
PostPosted: Fri Jan 20, 2023 9:38 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 24, 2007 2:45 pm
Posts: 1370
Location: Calgary, Canada
Status: Amateur
Michaeldc wrote:
Well that’s pretty much that about that - I need to install some frets and then spend several hours sanding and refining before sending it off to finish. The client was down for a shop-visit yesterday and is pretty excited!

M

Very nice Michael. The inlay reminds me of some done by a local luthier here named Judy Threet using a lot of alternative to shell materials.


These users thanked the author Darrel Friesen for the post: Michaeldc (Sat Jan 21, 2023 7:56 am)
Top
 Profile  
 
Michaeldc
PostPosted: Sat Jan 21, 2023 1:57 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1537
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Darrel Friesen wrote:
Michaeldc wrote:
Well that’s pretty much that about that - I need to install some frets and then spend several hours sanding and refining before sending it off to finish. The client was down for a shop-visit yesterday and is pretty excited!

M

Very nice Michael. The inlay reminds me of some done by a local luthier here named Judy Threet using a lot of alternative to shell materials.


I finally got a chance to check out her work - Gorgeous!

Thanks, M
Top
 Profile  
 
mtracz
PostPosted: Fri Feb 10, 2023 4:03 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon Jan 28, 2008 11:24 am
Posts: 164
Location: Ohio
First name: Mike
Last Name: Tracz
Michael,

Your work, process, and outcome are beyond inspiring. Thank you for sharing!!!

_Mike

_________________
_Mike Tracz
MCT Guitars
https://www.instagram.com/mustcreatethings/
https://www.youtube.com/mustcreatethings


These users thanked the author mtracz for the post: Michaeldc (Fri Feb 10, 2023 11:42 pm)
Top
 Profile  
 
Hesh
PostPosted: Sat Feb 11, 2023 3:30 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13570
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Beautiful Michael a real stunner!!! Love the shop pics and it's spotless too :)


These users thanked the author Hesh for the post: Michaeldc (Sat Feb 11, 2023 5:21 am)
Top
 Profile  
 
jfmckenna
PostPosted: Sat Feb 11, 2023 11:12 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6261
Location: Virginia
This is looking fantastic Michael. A lot of nice design and artwork in this one.

I made my own 'Elevate' jig and I have found it to be rather full proof so far as to making mistakes. Knock on wood. I don't think it matters that you lift the guitar off the back or angle it or anything. It's only going to cut as deep as you set it.


These users thanked the author jfmckenna for the post (total 2): Pmaj7 (Sat Feb 11, 2023 11:39 pm) • Michaeldc (Sat Feb 11, 2023 2:48 pm)
Top
 Profile  
 
Terence Kennedy
PostPosted: Sat Feb 11, 2023 3:26 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3426
Location: Alexandria MN
Nice work! Really tasteful without crossing the line into gaudy country :)

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.


These users thanked the author Terence Kennedy for the post: Michaeldc (Sat Feb 11, 2023 3:27 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 3 of 3
  [ 69 posts ]  Go to page Previous  1, 2, 3

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: bftobin, Kbore and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com